Showing posts with label VMware ESXi. Show all posts
Showing posts with label VMware ESXi. Show all posts

Vmware tools fails with error missing freeBSD library

VMware Tools fails to start due to missing FreeBSD library

Details

If VMware Tools does not start after you install it, you might need to install a library that is missing because you do not have a full installation of FreeBSD 4.5.

Solution

Before you begin, make sure you have the FreeBSD 4.5 installation CD or access to the ISO image file.

To install the missing FreeBSD library
  1. Reboot the guest operating system.
  2. On the guest, in an X terminal, enter the following command to start the VMware Tools control panel:
    vmware-toolbox &
    If the following error message appears, the required library was not installed:
    Shared object 'libc.so.3' not found.
  3. Insert and mount the FreeBSD 4.5 installation CD or access the ISO image file.
  4. Change directories and run the installation script:
    cd /cdrom/compat3x
    ./install.sh

Workstation 7 Fails as have CPU support for CMOV, PAE, TSC, and FXSAVE instructions

Workstation 7 Fails as have CPU support for CMOV, PAE, TSC, and FXSAVE instructions

Symptoms

  • Workstation 7 does not install on your computer
  • The Workstation 7 installation fails
    You receive the following error:

    Error: This product can only be installed on a machine with CPU support for CMOV, PAE, TSC, and FXSAVE instructions.

Resolution

Due to changes in how Workstation 7 runs virtual machines, a new requirement is that host system CPUs must support PAE (Physical Address Extension) instructions. This was not a requirement in Workstation 6.x or earlier. Contact your CPU vendor to determine if your CPU has support for PAE.
Note: This also applies to Player 3.0, which has the same CPU installation requirement. This was not a requirement of Player 2.x or earlier.
If you are unable to install Workstation 7 on your host system because of this, install Workstation 7 to a different host that has a newer CPU or install an older version of Workstation.

Restart Management Agent on ESX / ESXi

Restart Management Agent on ESX / ESXi


To restart the management agents on ESX host:
  1. Log in to your ESX Server as root from either an SSH session or directly from the console of the server.
  2. Type service mgmt-vmware restart.
  3. Press Enter.
  4. Type service vmware-vpxa restart.
  5. Press Enter.
  6. Type logout and press Enter to disconnect from the ESX host.
If this process is successful, it appears as:
[root@server]# service mgmt-vmware restart
Stopping VMware ESX Server Management services:
VMware ESX Server Host Agent Watchdog [ OK ]
VMware ESX Server Host Agent [ OK ]
Starting VMware ESX Server Management services:
VMware ESX Server Host Agent (background) [ OK ]
Availability report startup (background) [ OK ]
[root@server]# service vmware-vpxa restart
Stopping vmware-vpxa: [ OK ]
Starting vmware-vpxa: [ OK ]
[root@server]#


To restart the management agents on ESXi:
  1. Connect to the console of your ESXi Server.
  2. Press F2 to customize the system.
  3. Login as root.
  4. Using the Up/Down arrows navigate to Restart Management Agents.
  5. Press Enter.
  6. Press F11 to restart the services.
  7. When the service has been restarted, press Enter.
  8. Press Esc to logout of the system.