- The host is a computer running Windows that has power management features in the hardware that varies the processor's operating speed.
- When the host processor speed increases, the guest operating system's real-time clock (RTC) runs too fast.
- Find the maximum speed of the host computer's CPU. To do this, open Control Panel > System. Note the speed rating of the processor (CPU) written in the model designation text. This may be higher than the current operating speed of the processor noted here. This value can often also be obtained from the computer's BIOS diagnostic screen when starting the computer.
Find the config.ini file:
Note: This file is normally created when the VMware product is installed. However, if the file does not exist, create a new text file in the appropriate location as described above, then add the required lines to form a valid config.ini file. For the specifications of the file, see Creating and Editing config.ini on Windows Hosts (1754).
Windows 2000 / XP - %AllUsersProfile%\Application Data\VMware\
Windows Vista - C:\ProgramData\VMware\
Edit config.ini, and add the following lines. Modify the cpukHz value according to the value of the physical computer's maximum CPU speed from step 1. Also add the second and third lines. This enables a mechanism that keeps the guest's clock accurate even when the time stamp counter (TSC) is slow.
host.cpukHz = "1700000"
host.noTSC = "TRUE"
ptsc.noTSC = "TRUE"
The example above is for a computer that has a maximum CPU speed of 1700 MHz (or 1.7 GHz). The value entered on this line must be in KHz. To convert the speed from MHz, multiply by 1000. To convert from GHz, multiply by 1 000 000.
- Restart the VMware Authorization service for the changes to take effect.
Click Start > Control Panel > Administrative Tools > Services. Right-click VMware Authorization Service and click Restart.
In addition, verify that the VMware in the guest operating system are set to enable time synchronization.
Open the VMware Tools toolbox application by double-clicking the VMware icon in the system notification area (tray).
Click Options, select Time synchronization between the virtual machine and the host operating system.